Spec Sheets
Heat Treated Fiberglass
Insul-Shield Fiberglass Fabric
Plus Fabrics
Gold Slag Shed
Black Slag Shed
Salmon Colored Acrylic Coated Fiberglass
Black Slag Shed
General Description: Black Slag is coated with a proprietary coating. The base fabric is manufactured using highly texturized silica yarn. Abrasion resistant coating for tough welding applications. Will shed molten spatter and sparks to 3000° F if used on a 15° or greater incline away from the heat source. Recommended for curtains, blankets and screens.
Physical Properties:
| Weight: | 23 oz. / sq. yard | ||
| Construction: warp x fill: | 20 x 14 | ||
| Weave: | Plain | ||
| Thickness (base fabric): | .040" | ||
| Breaking Strength (minimum): | Warp - 350 lbs., Fill - 290 lbs. | ||
| Abrasion Resistance,Taber: | 700+ cycles to failure using CS 10 wheel with 100 grams weight resistance at 50% vacuum level. | ||
| Temperature: | Continuous temperature to 1100° F (593° C) and higher for short duration temperatures. | ||
| K Factor (Heat Conductivity): | 0.3399 BTU / inch / hr / sq ft / ° F |
Ordering Information: Standard Lengths of Rolls is 50 yards.
Chemical Resistance (for base fabric): Resists most acids, alkalies and solvents, with the exception of hydrofluoric acid and corrosive environments at elevated temperatures.
Color: Black.
...
Disclaimer: To the best of our knowledge, the information contained herein is accurate. The information provided is based upon data furnished by our suppliers. However, Mauritzon Inc. assumes no liability whatsoever for the accuracy or completeness of the information contained herein. While believed to be reliable, the information of products are intended for use by skilled persons at their own risk. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.